38
---------- -------------------------------- -------------- ------- -----------
2007/05/14 b4b-b-0.2.0514.biz Boot-Rom image Y 127648
2007/11/20 default.cfg Config File N 28701
2008/04/03 lb4w-r-1.04.0403.img Operation Code Y 8034434
2008/08/19 lb4w-r-1.08.0819.img Operation Code N 8039249
2008/05/20 test.2 Config File Y 29154
---------- -------------------------------- -------------- ------- -----------
Total: 5 files.
5. Set boot up code using the following command:
(FortiSwitch-100_238) #boot-system opcode lb4w-r-1.08.0819.img
Start Up Success!
6. Display all of the files again (start up code should be set to the new runtime code):
(FortiSwitch-100_238) #dir
date file name file type startup size (byte)
---------- -------------------------------- -------------- ------- -----------
2007/05/14 b4b-b-0.2.0514.biz Boot-Rom image Y 127648
2007/11/20 default.cfg Config File N 28701
2008/04/03 lb4w-r-1.04.0403.img Operation Code N 8034434
2008/08/19 lb4w-r-1.08.0819.img Operation Code Y 8039249
2008/05/20 test.2 Config File Y 29154
---------- -------------------------------- -------------- ------- -----------
Total: 5 files.
Now you are finished with the upgrade procedure! Please reload the switch and configure
as desired.
Troubleshooting the Download Procedure
If you have configured an IP address (statically or via DHCP) on the FortiSwitch and still
cannot download the image file, try the following:
• Verify that the FortiSwitch is able to access the TFTP server by using the ping
command. Substitute the IP address of your TFTP server for the one shown in the
example below:
(FortiSwitch-100_238) #ping 10.10.10.31
PING to 10.10.10.31, by 5 32-byte payload ICMP packets, timeout is 3 seconds:
Reply from 10.10.10.31: bytes=32 time=0ms
Reply from 10.10.10.31: bytes=32 time=0ms
Reply from 10.10.10.31: bytes=32 time=0ms
Reply from 10.10.10.31: bytes=32 time=0ms
Reply from 10.10.10.31: bytes=32 time=0ms
Ping statistics for 10.10.10.31 :
5 packets transmitted, 5 packets received (100%), 0 packets lost (0%)
proximate round trip times:
Minimum = 0 ms, Maximum = 0 ms, Average = 0 ms
To Next Page
Loading...
