469
Submit - This will initiate the ping.
Managing CDP Function
Defining CDP Configuration Page
Use this menu to configure the parameters for CDP, which is used to discover a CISCO device on the LAN.
Configurable Data
Admin Mode - CDP administration mode which are Enable and Disable.
Hold Time - the legal time period of a received CDP packet.
Transmit Interval - the CDP packet sending interval.
Port Authen. State - the CDP administration mode for all ports which are Enable and Disable.
Command Buttons
Submit - Send the updated screen to the switch. Changes take effect on the switch but these changes
will not be retained across a power cycle unless a save is performed.
To Next Page
Loading...
