473
Viewing Trap Log Page
This screen lists the entries in the trap log. The information can be retrieved as a file
by using System Utilities, Upload File from Switch.
Non-Configurable Data
Number of Traps since last reset - The number of traps that have occurred since the switch were last
reset.
Trap Log Capacity - The maximum number of traps stored in the log. If the number of traps exceeds
the capacity, the entries will overwrite the oldest entries.
Log - The sequence number of this trap.
System Up Time - The time at which this trap occurred, expressed in days, hours, minutes and
seconds since the last reboot of the switch.
Trap - Information identifying the trap.
Command Buttons
Clear Log - Clear all entries in the log. Subsequent displays of the log will only show new log entries.
To Next Page
Loading...
