482
z Autodetect - Specifies that port may be dynamically registered in this VLAN via GVRP. The
port will not participate in this VLAN unless it receives a GVRP request. This is equivalent to
registration normal in the IEEE 802.1Q standard.
Tagging - Select the tagging behavior for this port in this VLAN. The factory default is 'Untagged'. The
possible values are:
Tagged - all frames transmitted for this VLAN will be tagged.
Untagged - all frames transmitted for this VLAN will be untagged.
Non-Configurable Data
Slot/Port - Indicates which port is associated with the fields on this line.
Status - Indicates the current value of the participation parameter for the port.
Command Buttons
Submit - Update the switch with the values on this screen. If you want the switch to retain the new values
across a power cycle, you must perform a save.
Delete - Delete this VLAN. You are not allowed to delete the default VLAN.
Viewing Port-based VLAN Information Page
This page displays the status of all currently configured VLANs.
VLAN ID - The VLAN Identifier (VID) of the VLAN. The range of the VLAN ID is (1 to 3965).
To Next Page
Loading...
