501
Refresh - Refresh the data on the screen with the present state of the data in the switch.
Viewing Port-Channel Information Page
Non-Configurable Data
Port Channel - The Slot/Port identification of the Port Channel.
Port Channel Name - The name of the Port Channel.
Port Channel Type - The type of this Port Channel.
Admin Mode - The Administrative Mode of the Port Channel, enable or disable.
Link Status - Indicates whether the Link is up or down.
STP Mode - The Spanning Tree Protocol Administrative Mode associated with the Port Channel. The
possible values are:
Disable - spanning tree is disabled for this Port Channel.
Enable - spanning tree is enabled for this Port Channel.
Link Trap - Whether or not a trap will be sent when link status changes. The factory default is enabled.
Configured Ports - A list of the ports that are members of the Port Channel, in Slot/Port notation. There
can be a maximum of 8 ports assigned to a Port Channel.
To Next Page
Loading...
