547
Viewing BOOTP/DHCP Relay Agent Status
Non-Configurable Data
Maximum Hop Count - The maximum number of Hops a client request can go without being
discarded.
Server IP Address - IP address of the BOOTP/DHCP server or the IP address of the next
BOOTP/DHCP Relay Agent.
Admin Mode - Administrative mode of the relay. When you select 'enable' BOOTP/DHCP requests will
be forwarded to the IP address you entered in the 'Server IP address' field.
Minimum Wait Time - The Minimum time in seconds. This value will be compared to the time stamp in
the client's request packets, which should represent the time since the client was powered up. Packets
will only be forwarded when the time stamp exceeds the minimum wait time.
Circuit Id Option Mode - This is the Relay agent option which can be either enabled or disabled. When
enabled Relay Agent options will be added to requests before they are forwarded to the server and
removed from replies before they are forwarded to clients.
Requests Received - The total number of BOOTP/DHCP requests received from all clients since the
last time the switch was reset.
Requests Relayed - The total number of BOOTP/DHCP requests forwarded to the server since the last
time the switch was reset.
Packets Discarded - The total number of BOOTP/DHCP packets discarded by this Relay Agent since
the last time the switch was reset.
To Next Page
Loading...
