604
Viewing DiffServ Policy Attribute Summary Page
Non-Configurable Data
Policy Name - Displays name of the specified DiffServ policy.
Policy Type - Displays type of the specified policy as 'In’ or 'Out'.
Class Name - Displays name of the DiffServ class to which this policy is attached.
Attribute - Displays the attributes attached to the policy class instances.
Attribute Details - Displays the configured values of the attached attributes.
Command Buttons
Refresh - Refresh the displayed data.
Configuring DiffServ Service Configuration Page
Selection Criteria
Slot/Port - Select the Slot/Port that uniquely specifies an interface. This is a list of all valid slot number
and port number combinations in the system. For Read/Write users where 'All' appears in the list, select
it to specify all interfaces.
Direction - Select the traffic direction of this service interface. This selection is only available to
Read/Write users when Slot/Port is specified as 'All'.
Configurable Data
Policy In - This lists all the policy names of type 'In' from which one can be selected. If 'none' is selected,
this will detach the policy from the interface in this direction. This field is not shown for Read/Write users
where inbound service policy attachment is not supported by the platform.
Non-Configurable Data
This information is only displayed when Slot/Port is specified as 'All'.
To Next Page
Loading...
