609
Non-IP Traffic Class - Displays traffic class (i.e. queue) to which all non-IP traffic is directed when in
'trust ip-precedence' or 'trust ip-dscp' mode. Valid Range is (0 to 6).
802.1p Priority - Displays the 802.1p priority to be mapped.
IP Precedence Value - Displays IP Precedence value. Valid Range is (0 to 7).
Command Buttons
Submit - Send the updated configuration to the switch. Configuration changes take effect immediately.
These changes will not be retained across a power cycle unless a save is performed.
Restore Defaults - Restores default settings.
Configuring CoS interface
Selection Criteria
To Next Page
Loading...
