Fortinet MR1 - Page 611

611
Scheduler Type - Specifies the type of scheduling used for this queue.
Scheduler Type can only be one of the following:
 strict
 weighted
Default value is weighted.
Queue Management Type - Queue depth management technique used for queues on this interface.
This is only used if device supports independent settings per-queue.
Queue Management Type can only be:
 taildrop
Default value is taildrop.
Command Buttons
Restore Defaults for All Queues - Restores default settings for all queues on the selected interface.
Submit - Send the updated configuration to the switch. Configuration changes take effect immediately.
These changes will not be retained across a power cycle unless a save is performed.
Viewing CoS interface queue status
Selection Criteria
Slot/Port - Specifies all CoS configurable interfaces. The option "Global" represents the most recent
global configuration settings. These may be overridden on a per-interface basis.
Non-Configurable Data
Queue ID - Specifies the queueID.