Foss Infratec 1241 Service Manual

Infratec™ 1241 Grain Analyzer
Service Manual 1001 5015 / Rev. 4 3:17
15. Put in the holder into the TWM. Note that the cable from the drawer sensor
should be placed between the rubber sealing and the chassis. Fasten with three
screws (p/n 55320017).
Fig. 3:31
16. Loosen the three letter screws 1 on the Front Transport Securing Device. Store
them in the extra holes on the Front Transport Securing Device.
Fig. 3:32

Foss Infratec 1241 Specifications

General

Brand	Foss
Model	Infratec 1241
Category	Measuring Instruments
Language	English