Infratec™ 1241 Grain Analyzer
3:18 Service Manual 1001 5015 / Rev. 4
17. Loosen the two letter screws 1 on the Back Transport Securing Device and grip
the Test Weight Module at the same time so that it will not fall. Store them as
well in the holes in the Front Transport Securing Device.
Fig. 3:33
18. Fasten the two allen screws 1 hard with a 4 mm allen wrench. Grip the Test
Weight Module at the same time so that you can feel that it is getting centered.
Fig. 3:34
To Next Page
Loading...
