Fostex DMT-8VL - Setting the Undo Function Range (Undo)

DMT-Svl Owner's Manual (SETUP mode)
17. Setting the Undo function range ("Undo”)
You can set an effective range for the Undo function in •Undo" in Setup mode.
Two modes are available for the Undo function: •Edit*: Non-destructive mode OFF
- this mode allows for undo of auto punch in/out. copy A paste, and move A pa*te.
and "ALL": Non-destructive mode ON - this mode allows for undo of all types of
recording and editing.
<Nota>
When executing direct recording in ^indo ALL" mode you noed enough free disk space
lo accommodate resume recording data. II you record a large amount of data m this
mode, the remaining disk space may run out dunng your performance
lo m is case, use the Undo function as soon as possible (Once you perform any edt
operators, you will not be able to use the Undo function.) To maximize the avaftabte disk
space, out an unnecessary pert of another Programs, and move the ABS END pomt o i
each Program bac*ward as much as possible
1. Prats the DISP SEL key to select "SETUP" and press the EXECUTE/YES ksy.
(•SETUP- indicator will kght up.)
Turn rhe JOG dial to xeled blinking "Undo''.
The display will change to womtthlog similar r o this, and the current value will appear.
(The default setting Is "Edit".)
2 .
Press the EXECUTE/YES ksy again.
The letters 1 Edit * on the display will blink, and you can edit the value now.
3. U se the JOG dial to select •Edit" or *ALL*.
Turning the JOG dial counter-clockwise m Iff se/eti * Edit ", and turning tt clockwise will
select •ALL".
•ear (Norwlaalructfvs mod# o*)
Tba Undo function s •ffadr-s erty on the AH© Punch
IrVOut. Patio Erase, and Cm kncSor*.
•ALL* (Nocvdasa\»c*ve mode on)
Tha Undo function >5 effective on normal rocordrg as
won as no Auio Punch WOWL Paste Erase, and CU
functions.
4. Press the EXECUTE/YES key again.
The display in Step 1 will appear, and the setting is complete.
5. Press the STOP button or the EXIT/NO key to quit Setup mode.
135