Fostex DMT-8VL - 5. Saving and loading the recordings (SAVE, LOAD)

IHOTMis
DMT-8vi Owner's Manual (SETUP mode)
5. Saving and loading the recordings ("SAVE - , "LOAD")
You can select whether you wish to save the 'currently-selected* single Program
(audio data plus Setup data) or 'all" Programs to the connected DAT machine.
This function allows you to store finished or incomplete songs to the DAT machine
temporarily, and Is useful when you wish to create more recording space.
Since the savc/load operation for each Program is executed as illustrated in the
diagram below, the process duration win be four times the total length of all Program
data (time length up to ABS END).
TrMrVMlPl ♦ P3 ♦ P3 ♦ P4 ♦ PS|
If you save all Programs, the process duration will be four times the total length of
all Program data to save them. The following diagram shows the sequence of the
Programs saved to the DAT machine:
PI -> (10 seconds between the songs) -> P2 (10 seconds between the songs) -> P3
(10 seconds between the songs) -> P4 (10 seconds between the songs) -> P5.
117