Fostex DMT-8VL - Using Only the Recorder Section on the DMT-8 Vl

DMT-Svt Owner's Manual (Recording/Playback)
5. Using only the recorder section on the DMT-8VL
You can use the internal hard disk recorder alone. Connect the group out of the
external mixing console (that has eight monitor mix channels } to the RECORDER
IN connector of the DMT-Svt, and connect the DMT-Svl RECORDER OUT jack to the
tape in connector (x8) of the external mixer.
Since the DMT-SVI has two RECORDER IN jacks for 1/3/5/7 and 2Z4/6/8, It may be
a good idea to use a patch-bay so that you can change connection from the front.
a Sot mo DMT ®vi to rn# ccfaUt settrg
• Make tiro mat you have selected an appreciate Program rximbei
n
Shews the input lord at the REC ORDER H oonoectof*
Outputs fie signal rpm trom me RECORDER IN connectors.
Shows tha output level of tha »ac* (tiai« eel »o ‘dG ouT) M L (odd-
rurfcsced tr acfcl an d R <ev*n- nufrberw d track) _
Outputs r* signalot ms track sat to MOouT_
erthar me l/M/7 or 2MM ccmector
omxeeues takmi.i
External mixing console
L*R level meter V stents mo RECORDER IN m put level rt the ^ .*3/5.7 connector la uaad.
and fT shows the rpjt level rf the £4/6/8 ccmactor * ua ad_
Dafal output If trie t/3/V7 connector s used, me L output MB OUlptt the tfgrtf top* *om
me 1/3 Wt oomector. and the R wi» output ms *>;r* «tt«r the meat*
taders UR i m# osmector « used. vice varaa
Rote
iyou haw connected any plug to the RECORD IN jar* on thn DMT-dvi, tha connaciod dovico wil
have priority and you vrfl not e* atria to record data via me INPUT taders.
ft you wish to record data using the DMT-Bv. mUar turction, be sure to remove an Insorted plug
from ms RECORDER IN jack
74