Fostex DMT-8VL - Before Operating the DMT-8 VL

DMT-8VL Owner's Manual (Before operating the DMT-8 vl)
Before Operating the DMT-8VL
This section Includes the following Items that you need to know before operating
the DMT-8vu _
1. Layout of the DMT-8VL top panel
The DMT-8 vl Is a digital multitrack recorder that combines a mixer and a recorder,
as shown beiow. All the switches, knobs, and faders on the top panel are categorized
into the following sections, each of which has dedicated functions. Now that you
have learned the functions of the knobs and switches In the previews section
"Names and Functions." take a look at the layout of these parts on the entire top
panel to learn their location. <Mo«ittor Mc«on>
{ tAUXNMlMwn MG«OT» ' Till* BOClKKI » UMd (0 Mtoct mi
TN*a*cft»»i~dto«Mt»» **************
. . _ . ^ w via headphone* or powered
mo levef of the eg ntt Input from
the o fleet unit
Equalizer eection>
TNa section a ueed in
apply equaJIMon to
the egnet aC|utrte.1 to
the Input aedfon EQ
dcea not affect toe
merttoring egntf
<lnpuf eeefeon:-
TNe MCtion « ueed to oornrol toe egnal
that is recorded to toe recorder. The
sgnal adh*** and m toe
equafeer eechcn wit Da recorded in the
recorder The signal s also sent to the
AUX eend and monitor sorters
evnJterecutfy
This section is used to operate the
internal hard d* in order to piay
b*c*. record, edit and fcxafte data,
end to aaloct recordrg tracks