Fostex DMT-8VL - Maintenance

DMTSvl Owner’s Manual (MMC/FEX List/Maintenance/Specificarions)
Maintenance
Cleaning the exterior
• For normal cleaning, use a soft dry cloth.
For stubborn dirt, moisten a doth in diluted detergent, wring it our firmly, and wipe the
dirt off. Then polish with a dry doth.
Never use solvents such as alcohol, thinner or benzene, since these will damage the
printing and finish of the exterior.
Specifications
Mixer Section
Input/Output
INPUT (1.2)
Connector : 4 6mm PHONE lack ( x 2)
Input impedance : 20k Q or more
Input level ; -lOdBV (Hl -30dBV (Ml, -SOdBV (L) (Switchable)
INPUT (3 ~ 8)
Connector : 4> 6mm PHONE jack ( x 6)
Input Impedance : 20k 0 or more
Input level '.-lOdBV
AUX SEND 1.2
Connector : C 6mm PHONE )ack ( x 2)
Load impedance : 10k Q or more
Output level ;•lOdBV
AUX RTN l p 2 (L, R)
Connector : <> 6mm PHONE jack ( x 4)
Input Impedance : 20k Q or more
Input level : - 20dBV
STEREO OUT (L R)
Connector : RCA pin Jack ( x 2)
Load impedance : 10k Q or more
Output level : *lOdBV
MONITOR OUT (L R)
Connector : 6 6mm PHONE lack ( x 2)
Load impedance : 10k U or more
Output level : - JOdBV
HEADPHONE OUT
Connector : 4> 6mm STEREO PHONE fack ( x 1)
Load impedance : 8 Q or more
Maximum Output: lOOmW (at SO Q)
EQUALIZER
Shelving type
HI :10kHz ±15dB
LOW : 100Hz ± lSdB
FREQUENCY RESPONSE : 20Hz - 20kHz
148