Fostex DMT-8VL - Page 152

MAC command i/iC
137
Setting a digital output channel 131
Maintenance
148 Setting display resolution mode OS'/OFF 132
im
Setting Slave mode ON/OfF 72 , 133
Soles about power supply 6
Setting hUDt device IP 134
Sotes on handling the hard disk 7
Setting the Undo function range
135
Sotes on the setup location
Specifications 148
Sotes on repair
8
m
IOI
Overtime indication i 31
(UJ
Timebase 38
Ovrrdubbrng 52
Undo key 19
m
Un-formatted indication
32
Pan pot knob
14 Using only the recorder section 74
Precautions
6 Undo/Redo of Auto Punch In/Out 82
Paste key 21
Undo/Redo the paste operation 98. 103
Play button
20 Undo/Redo the erase operation 106
Punch in/out tack 26 Undo/Redo the cut operation 107
Power switch 26
IWl
Preset display 27
Warning message 31
Program change 30 , 37. 50
Ping-pong recording 65
Punch In/Out 76
Punch In/Our recording using a foot switch 83
Punch In/Out rehearsal using a foot switch 84
Punch tn/Our take using a foot switch 85
Prvroil time 124
Record track select key 16
Redo key 19
Recall key 19
Record button 21
Rewind button 20
Repro monitor 37
RBC ENABLE/UtSABLE 128
Store key 1 7
Shuttle dial 19
Stop button 20
SETUP mode display 29, 108
Storing the Punch In point 78
Storing the Punch Out point 79
Setting the auto return start /end point 89
Storing the start/end point in real-time 89
SETUP mode 108
Setting the time signature 113
Setting tempo 114
Saving and Loading the recordings 117
Saving data to a OAT machine 119
Setting the preroll time for the locate
operation 124
Selecting the synchronized signal output from
the MILV OUT connector 125
Setting the SfTC frame rate 126
Setting MTC Offset time 12 7
Setting recording enable/disable mode 128
Setting a digital input channel 129
152