Fostex DMT-8VL - Page 53

DMT~8vl Owner's Manual (Recording/Playback)
Hint 2: Applying rtvfrbtfilion to the snare sound
If you have a drum machine that hax parallel out connectors, it may be a good Idea to
apply reverberation to the snare sound before recording the sound to Tracks 1 and 2.
It Is very effective to use the AUX function of the DMT-&VL to apply ambience effects
such as reverberation. (Kefer to the section "Step 4: overdubblng the vocal sound to
Track 4" or "Mlxdwn" for more information on the AUX function.)
You can refer to the settings beta*:
<Chsnne! 1 setting
Smrsttfnii
<Chsnne4 2 s«ttlng>
•MSSSHntl.
^Channel 3 s«tting>
Drum racNna't snare output -> Connect it to re NPUT )eck 3 of the OMT-Ovc
WPUT S€L mhcb •> “INPUT
PAN consul -> Cooker (The stereo image of tie sraro sound b centered >
HPUT M*f-> according*
<Channel 3 AUX S*t1lng>
AUX control -> Turn the knot towed "A1" to edfj* fr* amoent of the signor sent to tie reverb
U*.
<Master settlngs>
AUX RTN 1 coned •> Adfuel tie reveitaration amount.
Master laders L/R •> 7-0
W
53