FPT F32 MNS - Scheduled Maintenance; Overhaul and;or basic maintenance

SCHEDULED MAINTENANCE
Servicing Plan
Enginevisualinspection .............................................
Checkforpresenceofwaterinthefuelfilterorpre-filter ...................
Checkengineoillevel ..............................................
Checkairfilter ....................................................
Checkbattery ....................................................
Checkcoolingliquidlevel ............................................
Checkthewearconditionsofthealternator’sbeltandofthewaterpump ......
Checkforpresenceofwaterinthepre-filter .............................
Checkforpresenceofwaterinthefilter ................................
Checkthecompressor’sbeltwearconditions.............................
Ignitionpumpoverhaul .............................................
Checkturbo-compressorandcleanitifnecessary .........................
Tappetcheckandadjustment.........................................
Changeengineoil .................................................
Replaceengineoilfilter .............................................
Replacefuelpre-filter ...............................................
Replacefuelfilter...................................................
Replacethealternator’sbeltandthewaterpump .........................
Replaceairfilter ...................................................
Replacethecompressor’sbelt ........................................
Changethecoolingliquid ............................................
Frequency (hours)
Daily
Daily
Daily
Daily
Every six months
Daily
300 (2)
150 (1)
Every six months (1)
300
3000
1200
1000
500
500
1000 (1)
600 (1) (3)
1200
1200 (2)
1500
Every 2 years or 1200 hours
Checks and regular servicing
!
Engine lubrication frequency has been calculated presuming the use of fuel with content of Sulphur < 0.5%.
WARNING! In case of use of fuel containing a percentage of Sulphur e > 0.5 %, the engine oil replacement interval must
be halved.
Use engine oil SAE 15W40 T2 - URANIA LD7
Overhaul and/or basic maintenance
1) Using fuel complying with EN590 Standard
(2) Depending on appliance
(3) Using filters with filtering degree < 12  and  > 200  filtering efficiency
SECTION 3 - INDUSTRIAL APPLICATION
61
F32 SERIES
Print P2D32F005 E Base - April 2009