FPT F32 MNS - Timing Gearcase

127698
119115
Figure 19
Figure 20
- Remove the rear part (1), of the timing gearcase cover.
- Remove the tappet rods (1).
- Disassemble the cylin der head;
loosen the cylinder head (3) fastening screws (2);
hook the brackets with metal ropes and, throughout a
hoister, detach the c y linder head with valves from the
basement.
- Remove the cylinder head gasket.
Timing gearcase
1
12
SECTION 3 - INDUSTRIAL APPLICATION
F32 SERIES
Base - April 2009 Prin t P2D 32F005 E