FPT F32 MNS - Torque Setting

30
SECTION 4 - MECHANICAL OVERHAUL
F32 SERIES
Base - April 2009 Pri nt P2D32F005 E
TORQUE SETTING
PART
TORQUE
Nm kgm
Motor vent cover fastening (M6x1 6g x 18) 10± 1 1±0.1
O
il Pan unit
F5CE5454
Side plug (M6) 40±4 4±0.4
Side plugs (M22) 50±5 5±0.5
Front plug (M35) 40±4 4±0.4
Sump fastening 70±7 7±0.7
oil Pan Unit
F5CE9454
Threaded cap with O-ring 50±5 5±0.5
Oil pan spacer fast ening (M8x 1.25 6g x 35) 25±2.5 2.5±0.25
Engine block
”Crankshaft caps
- pre-tightening
50±2.5 5±0.25
- tightening 80˚
- angle tightening”
90˚
Piston cooling nozzle
18±1.8 1.8±0.18
3/8” conical threaded cap 40±4 4±0.4
1/8” conical threaded cap 15±1.5 1.5±0.15
Water drainage cap 25±2.5 2.5±0.25
Oil t urbo delivery pipe fixing 40±4 4±0.4
Timing gear case
Conical threaded cap 15±1.5 1.5±0.15
Gear cooling n oz ze 15±1.5 1.5±0.15
Cover fastening (M8x 1.25 6g x 25) 25±2.5 2.5±0.25
Cover fastening (M8x 1.25 6g x 35) 25±2.5 2.5±0.25
Cover fastening (M8x 1.25 6g x 16.5) 25±2.5 2.5±0.25
Gearcase fastening (M8x 1.25 6g x 22.5) 25±2.5 2.5±0.25
Gearcase fastening (M8x 1.25 6g x 25) 25±2.5 2.5±0.25
Gearcase fastening (M8x 1.25 6g x 35) 25±2.5 2.5±0.25
Gearcase fastening (M8x 1.25 6g x 50) 25±2.5 2.5±0.25
Front cover fastening (M6x 1 6g x 16) 10±1 1±0.1
Rear cover fastening (M8x 1.25 6g x 18) 25± 2.5 2.5±0.25
Flywheel case
F5CE5454
Gearcase fastening (M8x 1.25 6g x 16.5) 25±2.5 2.5±0.25
Gearcase fastening (M8x 1.25 6g x 25) 35±3.5 3.5±0.35
Gearcase fastening (M12x 1.75 6g x 40) 110±11 11±1.1
Flywheel case
F5CE9454
Gearcase fastening (M8x 1.25 6g x 25) 35±3.5 3.5±0.35
Gearcase fastening (M12x 1.75 6g x 30) 110±11 11±1.1
Gearcase fastening (M12x 1.75 6g x 40) 110±11 11±1.1
Gearcase fastening (M12x 1.75 6g x 50) 110±11 11±1.1
Plate fastening 25±2.5 2.5±0.25
Revi - 12.2012