This publication provides unit and relevant component repair
data, specifications, instructions and methodologies.
This publication has been drawn up for qualified and
specialised personnel.
Before performing any operation check that the part relevant
to the unit on which you must work is available along with all
safety devices for accident-prevention, such as, goggles,
helmet, gloves, shoes, etc. and hoisting and transporting
equipment.
Operations are to be performed by following the indications
included here, using the special equipment indicated and
assuring proper repair, compliance with schedule and
operator’s safety requirements.
Each repair must aim to restore operating efficiency and safety
in compliance with the FPT provisions.
FPT cannot be held liable for modifications, alterations or other
interventions non authorised by FPT on the vehicle and if the
unit is warranted the above mentioned interventions will cause
its expiration.
FPT is not liable for repairing interventions.
FPT will provide further details required to carry out the
interventions and all the instructions that are not included on
this publication.
Data included in this publication may not be up-to-date
therefore subject to Manufacturer’s modifications that can be
added at any time for technical or commercial purposes and
also to meet new law regulations in other Countries.
If issues on this publication differ from what is actually noticed
on the unit, please get in touch with the FPT network before
starting any intervention.
It is forbidden to copy this text or any of its parts and all
illustrations included.
Publication edited by:
FPT Industrial S.p.A
Via Puglia 15, 10156 Torino, Italia
www.fptindustrial.com
Print P2D32F005 E -II
nd
Ed. 04.2009
Revi - 12.2012
To Next Page
Loading...
Need help?
General
