Fronius TPS 270i C User Manual

36
No. Function
(1) Process control parameter indicator
For the LSC and PMC welding processes
Penetration stabilizer indicator
Lights up if the penetration stabilizer is active
Arc length stabilizer indicator
Lights up when the arc length stabilizer is active
(2) Left parameter selection
The corresponding indicator lights up when a parameter is selected.
The following parameters can be selected by pressing the button:
Material thickness *
In mm or inches
Welding current *
In A
Before the start of welding, the machine automatically displays a standard value
based on the programmed parameters. The actual value is displayed during weld-
ing.
Wire speed *
In m/min or ipm
Special function
Any parameter can be assigned to this
The function can be selected if a parameter has been saved.
Penetration stabilizer
Arc length stabilizer
The "Penetration stabilizer" and "Arc length stabilizer" process control parameters
can only be selected when the LSC/PMC welding process is used.
The currently adjustable parameter is marked with an arrow.

Fronius TPS 270i C Specifications

General

Brand	Fronius
Model	TPS 270i C
Category	Welding System
Language	English