Fuji Xerox ApeosPort-II C4300 User Manual

15 Problem Solving
446
Problem Solving
15
White dots
appear in black
filled areas.
The paper is unsuitable. Load suitable paper.
Refer to "Loading Paper" (P.249).
The drum cartridge has
deteriorated or is damaged.
Replace the drum cartridge with a new
one.
Refer to "Replacing Drum Cartridge [A1],
[A2], [A3], or [A4] (for customers having a
spot maintenance contract)" (P.415).
Printed toner
smudges when
rubbed with your
finger.
Toner is not
fused.
The paper is dirty
with toner.
The paper is damp. Replace the paper with new one.
Refer to "Loading Paper" (P.249).
The paper is unsuitable. Load suitable paper.
Refer to "Loading Paper" (P.249).
The entire paper
area is printed
black.
The drum cartridge has
deteriorated or is damaged.
Replace the drum cartridge with a new
one.
Refer to "Replacing Drum Cartridge [A1],
[A2], [A3], or [A4] (for customers having a
spot maintenance contract)" (P.415).
High-voltage power supply
problem may have
occurred.
Contact our Customer Support Center.
Nothing is
printed.
Two or more sheets of
paper are being fed
simultaneously (double-
feed).
Fan the paper well and load it again.
Refer to "Loading Paper" (P.249).
There is no toner left in the
toner cartridge.
Replace the toner cartridge with a new
one.
Refer to "Replacing Consumables" (P.410).
High-voltage power supply
problem may have
occurred.
Contact our Customer Support Center.
Symptom Cause Remedy

Fuji Xerox ApeosPort-II C4300 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-II C4300
Category	Printer
Language	English