5 Scan/E-mail
108
Go to – Specify the start number of a job template from which job templates are to be
displayed.
Template Description – Allows you to view the description on the required job template.
Refresh – Updates the list of available job templates.
1. Press the <All Services> button
on the control panel.
2. Select [Network Scanning] on
the touch screen.
3. Select the job template to be
used.
4. Press the <Start> button on the control panel.
Save in: - Scan to FTP/SMB
This section describes how to send scanned documents to specified destinations using
FTP or SMB protocols. For more information, refer to the following.
Transfer Protocol – page 109
Address Book – page 109
Server – Specify the address of the destination server. Select a server name from the
address book after selecting [Address Book] or enter a server’s address after selecting
[Keyboard].
NOTE: If server name is used instead of an IP address, the appropriate DNS
information has to be entered via CenterWare Internet Services. Without DNS
properly defined the host name will not be translated to an IP address.
Shared Name – Enter a name assigned for the shared folder. If you select a server from
the address book, the preset name is displayed. To change the name, select
[Keyboard] and use the displayed keyboard. Not required for FTP servers.
Save in – Specify the location (or path) of the directory for saving files. If you select a
server from the address book, the preset location is displayed. To change the location,
select [Keyboard] and use the displayed keyboard.
Login Name – Enter a log-in name if required by the destination server. If you select a
server from the address book, the preset name is displayed. To change the name,
select [Keyboard] and use the displayed keyboard.
Password – Enter a password if required by the destination server. If you select a
server from the address book, the preset password is displayed. To change the
password, select [Keyboard] and use the displayed keyboard.
Detailed Settings – page 110
Clear Field – Clears the currently selected field.
Keyboard – page 110
To Next Page
Loading...
Need help?
General
