4 Fax/Internet Fax
76
1. Select [Address Book] on the
[Basic Features] screen.
2. Select the destinations as
required.
Address List
Lists all the destinations registered for speed dialing. You can look up a destination
using [Go to] and [Select to Enter Number].
• Go to – The speed dial code you enter in this field is displayed at the top of the list.
You can specify the code between 001–500.
• Select to Enter Number – Displays a cursor in the [Go to] field when you select it.
The screen changes automatically to display the speed dial code you entered in
[Go to].
Letters
Locates a destination by the index letter assigned to it. The following five tabs are
available: ABCDE, FGHIJ, KLMNO, PQRST, UV-Z.
0–9
Locates a destination by the index number assigned to it.
Group
Locates destinations registered in group codes.
Speed Dial
This feature allows you to select a destination quickly using a 3-digit code assigned to
it. An asterisk (* on the screen keypad or the control panel) can be used to specify
multiple speed dial codes and a pound sign (#) to designate a group code.
For information on how to register speed dial codes, refer to Address Book in the
Setups chapter on page 234.
Enter this data Results
123 Dials the destination assigned to the speed dial code 123.
12* Dials the speed dial codes 120–129. The asterisk (*) represents all
numbers from 0 to 9.
*** Dials all speed dial codes registered in the machine.
#01 Dials the group code 01. A group code is a speed dial code that can
contain up to 20 destinations and begins with a pound sign (#). Up to
50 group codes can be registered.
To Next Page
Loading...
Need help?
General
