4 Fax/Internet Fax
78
Shift
Switches between uppercase and lowercase letters.
Tone (:)
Switches between pulse dialing and tone dialing.
Relay Broadcast
This feature allows you to send a document to a remote machine, which then sends the
document to multiple destinations registered in the remote machine for speed dialing.
This can reduce transmission cost when the destinations are out of town or located in
another country because you only need to send the document to the broadcasting
machine.
The remote machine that broadcasts your document to multiple destinations is referred
to as a relay station. You can specify multiple relay stations, or even ask the first station
to relay your document to the secondary relay station, which then broadcasts the
document to other destinations.
The following methods are available for relay broadcasting.
Fax Signals
The machine provides a unique method only for Fuji Xerox machines that have the
relay broadcasting feature. Before sending a document, the remote machine that
broadcasts your document needs to be registered as a relay station in a speed dial
code on your machine. For more information on registering relay stations for speed
dialing, refer to Address Book in the Setups chapter on page 234.
DTMF
You can manually enter DTMF codes as part of a fax number to specify a relay station
and destinations that also understand DTMF codes. G3-compatible machines that
allow manual sending can initiate relay broadcasting to the machine. For more
information, refer to Special Characters on page 79.
F Code
Machines that support F Code and relay broadcasting features allow relay
broadcasting operations using F Code. For more information, refer to F Code on
page 93.
iFax
You can send an iFax document to an iFax-capable relay station in a network, which
converts the document to a regular fax and broadcasts it to destinations without an iFax
capability.
To send an iFax document for relay broadcasting, specify the relay station's e-mail
address as follows.
FAX=1234567890/T33S=777@wcm128.xerox.com
Where:
1234567890: The destination’s fax number
777: The destination’s F Code (if required)
wcm128: The host name of the relay station
To Next Page
Loading...
Need help?
General
