EasyManuals Logo
Home>Fuji Xerox>All in One Printer>Document Centre 236 series

Fuji Xerox Document Centre 236 series User Manual

Fuji Xerox Document Centre 236 series
367 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #329 background imageLoading...
Page #329 background image
Cautions and Limitations
329
Page Transmission Time – ITU No. 1 document
33.6 Kbps (standard): less than 4* seconds (*: reference data)
Telephone Line Type
Standard public analogue switched telephone line or equivalent
Compatibility
Super G3, ECM, G3
Resolution Capability
Standard: 200 × 100 dpi (8 × 3.85 lines/mm)
Fine: 200 × 200 dpi (8 × 7.7 lines/mm)
Superfine: 400 × 400 dpi (16 × 15.4 lines/mm)
Superfine: 600 × 600 dpi
Resolution Conversion
Available for sending and receiving; smooth on receiving
Image Compression
JBIG, MH, MR, MMR
Long Page Scan Feature
600 mm maximum length
NOTE: This feature is only available when using the document feeder.
NOTE: This feature is not available for double-sided scanning.
NOTE: When using this feature to scan long documents which exceed 432 mm, the
operator must feed the document one sheet at a time. The paper weight should be
between 60 and 90 g/m
2
.
Cautions and Limitations
This section describes the cautions and limitations to observe when using the machine.
• When moving the machine, make sure to hold the middle part of the machine, not
the control panel or document feeder area. Excessive pressure on the document
feeder may cause machine malfunction.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox Document Centre 236 series and is the answer not in the manual?

Fuji Xerox Document Centre 236 series Specifications

General IconGeneral
BrandFuji Xerox
ModelDocument Centre 236 series
CategoryAll in One Printer
LanguageEnglish

Related product manuals