18 Appendix
336
Advanced Settings
Paper Tray 103 0 (Default): Auto
1: Tray 1
2: Tray 2
3: Tray 3
4: Tray 4
5: Manual feed
Sets the paper tray to be used for printing.
Coordinate
Rotation
104 0 (Default): 0 degree
1: 90 degree
Sets the paper orientation for printing.
Gradation Mode 105 1 (Default): Grayscale
2: Black pen
Sets the gradation mode.
Parameter
Item No.
Value
Auto Layout 106 0 (Default): On
1: Off
Selects whether aligning the position of the document and the
paper is to be done automatically or not.
Active Palette 107 0 (Default): Command
1: Panel
Selects whether to use a pen specified by command or set on
the panel.
No. of Prints 108 1–250 (Default: 1): 1–250
Sets the number of prints to be made.
Output Tray 109 0 (Default): Center Output Tray - Lower
1: Side Tray
2: Center Output Tray - Upper
80: Finisher Tray
Sets the output tray.
Parameter
Item No.
Value
To Next Page
Loading...
