12 Setups
212
Scan Size Defaults
Use this feature to configure or change the scan size buttons on the [Scan Size] screen
displayed under the [Scan Options] tab.
1. Select [Scan Size Defaults] on
the [Scan Mode Settings]
screen.
2. Use the scroll buttons to switch
between screens.
3. Perform the necessary
operations.
4. Select [Close].
Scan Size 1–11
Allows you to assign your choice of document sizes to each of the 11 buttons.
A/B Series Size
Select from paper sizes in A and B series formats.
Inch Size
Select from paper sizes presented in inches.
Others
Select from other various sizes such as postcards and envelopes.
Variable Size
Specify the height and width using the scroll buttons.
Output Size Defaults
Use this feature to configure or change the output size buttons displayed when
[Auto %] is selected on the [Reduce/Enlarge] screen under the [Scan Options] tab.
1. Select [Output Size Defaults] on
the [Scan Mode Settings]
screen.
2. Use the scroll buttons to switch
between screens.
3. Perform the necessary
operations.
4. Select [Close].
Output Size 1–8
Allows you to assign your choice of scan output sizes to each of the eight buttons.
A/B Series Size
Select from paper sizes in A and B series formats.
To Next Page
Loading...
Need help?
General
