12 Setups
244
Receive Control
Allows you to specify the receiving control for externally submitted jobs.
• According to Print Auditron – The receiving control depends on the setting made on
the machine. The [Job Login Failure] options are displayed.
• Save All – Saves all jobs to be received.
• Job Login Failure – Specifies how to treat the print jobs with a user ID or password
authentication failure. If you select [Save All], all jobs are saved. If you select [Cancel
Job], job receipt will be rejected.
• Job without User ID – Specifies how to treat the jobs without a user ID. If you select
[Save All], all jobs are saved. If you select [Cancel Job], job receipt will be rejected.
Document Expiry Date
Allows you to specify the storage period for the authenticated print jobs.
• Documents kept for – Specify the storage period within the range of 1–14 days.
• Documents deleted at – Specify the time to delete jobs when storage period expires.
You can set the time in the ranges of 0–23 hours and 0–59 minutes.
Fax Billing Data
This feature allows you to set the charge rate per unit of fax transmissions.
NOTE: This button is displayed with System Administrator access.
1. Select [Fax Billing Data] on the
[Login Setup/Auditron
Administration] screen.
2. Perform the necessary
operations.
3. Select [Close].
Charge Rate per Unit
Allows you to specify the charge rate per unit in 0.1 increments using the numeric key
pad on the screen.
Remote Login Setup
This feature allows you to configure the authentication settings for scan services which
utilize the network resources with the exception of the Scan to Mailbox service. The
available authentication service is Kerberos.
1. Select [Remote Login Setup] on
the [Login Setup/Auditron
Administration] screen.
2. Select the required option.
3. Select [Save].
Off
Disables the remote authentication service.
To Next Page
Loading...
Need help?
General
