Network Settings
201
TCP/IP - Get IP Address
Specify the method of obtaining an IP address for the machine.
TCP/IP - IP Address
Allows you to enter the IP address in the form of vvv.xxx.yyy.zzz. The IP address entry
is required when selecting [Manual] on the [TCP/IP - Get IP Address] screen.
TCP/IP - Subnet Mask
Allows you to enter the subnet mask in the form of vvv.xxx.yyy.zzz.
TCP/IP - Gateway Address
Allows you to enter the gateway address in the form of vvv.xxx.yyy.zzz.
TCP/IP - IP Filter
Specify whether to restrict the remote machines which send print jobs using LPD.
HTTP - SSL/TLS Communication
Specify whether to enable the SSL/TLS communication.
HTTP - SSL/TLS Port Number
Allows you to enter the port number for the SSL/TLS communication within the range
of 443, 8000–9999.
Machine E-mail Address/Host Name
This feature allows you to set e-mail address, host name, or domain name for the
machine.
1. Select [Machine E-mail
Address/Host Name] on the
[Network Settings] screen.
2. Perform the necessary
operations.
3. Select [Close].
E-mail Address
Allows you to enter the e-mail address of the machine up to 128 characters.
Host Name
Allows you to enter the host name of the machine up to 64 characters.
Domain Name
Allows you to enter the domain name of the machine up to 64 characters.