Fuji Xerox Document Centre 236 series User Manual

Output Format
121
Split Send
When sending data by e-mail, use this feature to divide scanned data into multiple e-
mail using the preset number of pages.
NOTE: The selections for this feature are displayed only when you have selected [E-
mail].
1. Select [Split Send] on the
[Output Format] screen.
2. Select the required option.
3. Select [Save].
Off
Disables the feature.
Split By Page
Divides scanned data by the preset number of pages. The presets are set up by the
System Administrator. For more information, refer to Other Settings in the Setups
chapter on page 226.
Document Name
Use this feature to enter a name for the file before saving in a mailbox, if you do not
want to use the name assigned by the machine.
NOTE: The selection for this feature is displayed only when you have selected [Scan
to Mailbox].
1. Select [Document Name] on the
[Output Format] screen.
2. Perform the necessary
operations.
3. Select [Save].
For information on keyboard entry,
refer to Keyboard in the Fax/Internet Fax chapter on page 77.
Login Name
Use this feature to set the login name for a destination server of scanned data.
NOTE: The selection for this feature is displayed only when you have selected
[Network Scanning].
1. Select [Login Name] on the
[Output Format] screen.
2. Perform the necessary
operations.
3. Select [Save].
For information on keyboard entry,
refer to Keyboard in the Fax/Internet Fax chapter on page 77.

Fuji Xerox Document Centre 236 series Specifications

General

Brand	Fuji Xerox
Model	Document Centre 236 series
Category	All in One Printer
Language	English