Stored Documents
251
Secure Print
A secure print job requires a user ID and a password registered in the machine to print
or delete the stored document. A user ID and a password can be specified from the
print driver.
1. Select [Secure Print] on the
[Stored Documents] screen.
Refresh
Brings the information up to date.
Go to
Use this field to specify the Secure Print number to be displayed at the top of the
screen. You can set the number within the range of 1 to 200 by using the scroll buttons.
Document List
Displays the password input screen after selecting a user ID from the list. Enter the
password to display the stored documents.
• Select All – Selects all documents in the list.
• Delete – Deletes a document.
• Print – Prints a document selected in the list. You can select whether or not to delete
the stored documents after printing.
NOTE: If you have forgotten the password, contact the System Administrator. The
System Administrator can access the stored documents without entering a password.
Sample Print
A sample print job allows you to print one set of a document prior to printing the whole
quantity. You can choose whether or not to print more sets after checking the print
result. A user ID and a password are required to access the stored document, and the
number of copies can be specified from the print driver.
1. Select [Sample Print] on the
[Stored Documents] screen.
Refresh
Brings the information up to date.
Go to
Use this field to specify the Sample Print number to be displayed at the top of the
screen. You can set the number within the range of 1 to 200 using the scroll buttons.
To Next Page
Loading...
Need help?
General
