Fuji Xerox Document Centre 236 series User Manual

Setup Menu
229
1. Select [Application
Communication Settings] on the
[System Settings] screen.
2. Select the required option.
3. Select [Close].
SOAP - Port Status
Use this feature to specify whether to enable the SOAP port.
Setup Menu
This screen allows you to register various items such as mailboxes, destination
addresses, and job flow sheets. For more information, refer to the following.
Mailbox – page 229
Job Flow Sheets – page 231
Address Book – page 234
Group Send – page 238
Comments – page 238
1. Select [Setup Menu] on the
[System Settings] screen.
2. Select the required option.
3. Select [Close].
Mailbox
Use this feature to create mailboxes for saving confidential incoming fax documents or
scanned documents. Fax documents in mailboxes can be printed out at a convenient
time and scanned documents in mailboxes can be imported to computers.
1. Select [Mailbox] on the [Setup
Menu] screen.
2. Select a mailbox number under
which a new mailbox is to be
registered.
3. Select [Create/Delete].
4. Select the required option.
NOTE: If you select [On], go to step 5 to register a password. Then the machine will
not allow the mailbox to be accessed unless the registered password is entered. If you
select [Off], skip step 5.

Fuji Xerox Document Centre 236 series Specifications

General

Brand	Fuji Xerox
Model	Document Centre 236 series
Category	All in One Printer
Language	English