Fault Codes
315
072-210
072-211
Tray 2 malfunctioned. Contact our Customer Support Center. Use a different
paper tray.
073-210
073-211
Tray 3 malfunctioned. Contact our Customer Support Center. Use a different
paper tray.
074-210
074-211
Tray 4 malfunctioned. Contact our Customer Support Center. Use a different
paper tray.
116-701 Double-sided printing is not possible due to insufficient memory. Add memory.
116-702 Printing was performed using a substitute font. Check the print data.
116-703 An error occurred during PostScript processing. Either confirm the print data, or
open spool settings on the details tab in the print driver to disable bi-directional
communication.
116-713 The job was printed out in parts because the hard disk ran out of space. Delete
unnecessary data.
116-720 An error occurred during printing due to insufficient memory. Close unused ports
or delete unnecessary data.
116-740 A numerical value operation error occurred because the print data contains a
value that exceeds the limit of the printer. Check the print data.
116-749 The print job was stopped because the specified font was not found. Install the
font or enable font replacement in the print driver.
116-771
116-772
116-773
116-774
116-775
116-776
116-777
116-778
The parameter values were corrected because the machine encountered a
problem when printing the data. If the received image is incomplete or
damaged, ask the other party to check the image or to resend the data. When
iFax forwarding is enabled, check with the recipient if they received the image
intact.
116-780 There is a problem with the document attached to the received e-mail. Check
the attached document.
124-701 Due to a malfunction in the specified tray, the output destination was changed to
the center output tray. Contact our Customer Support Center. Use a different
paper tray.
Code Description and Remedy
To Next Page
Loading...
Need help?
General
