The main setting items are as follows.
- DE selection list box
- Checkbox to select drives
Caution
The drive capacity that is displayed for the Value SSD (SSD-L) differs from the product's actual
capacity. For example, the drive capacity of a "1.92TB SSD-L" is displayed as "2.00TB".
5 Click the [OK] button.
The screen returns to the previous screen. The created RAID group is displayed in the RAID group list.
Note
• Click the [RAID Level] link for the existing RAID group to perform the following operations.
- The number of member drives can be checked. The drives with the checkbox selected in the
displayed screen are the member of the RAID group.
- The Controlling CM and configuration drives of the RAID group can be changed.
- Click the [Delete] button of the target RAID group area in the RAID group list to delete the
newly added RAID group.
6 When creating multiple RAID groups that configure a TPP, repeat Step 3 through Step 5.
Note
• Specify the threshold so that "Warning" is greater than or equal to "Attention".
• The "Attention" threshold can be omitted. When setting the "Attention" threshold, specify a
threshold while the checkbox is selected.
6. Configuration Settings for RAID Groups or Thin Provisioning
When Using Thin Provisioning Volumes (TPVs)
128 Configuration Guide (Basic)
To Next Page
Loading...
