The main setting items are as follows.
• New Volume
- Name
- Capacity
- Allocation
• Automatic Setting
- Drive Type
- RAID Level
- Number of Volumes
- Start of Suffix
- Digits of Suffix
3 Click the [Create] button.
4 A confirmation screen appears. Click the [OK] button.
TPV creation starts.
5 Click the [Done] button to return to the [Volume] screen.
■
Manually Selecting Destinations to Create Volumes
The procedure to create TPVs by selecting a destination TPP manually is as follows:
1 Click [Create] in [Action].
The [Create Volume] screen appears.
2 Select "Thin Provisioning Volume" for "Type" and "Manual" for "RAID Group / TPP Selection".
Specify the detailed information of new volumes and select the TPP in which the volumes are to be
created.
6. Configuration Settings for RAID Groups or Thin Provisioning
When Using Thin Provisioning Volumes (TPVs)
131 Configuration Guide (Basic)
To Next Page
Loading...
