Fujitsu ETERNUS DX S5 Series - When a Server HBA Fails and Needs to Be Replaced

Note
• When using ETERNUS SF AdvancedCopy Manager or ETERNUS SF Express, refer to the
documents that are supplied with ETERNUS SF AdvancedCopy Manager or ETERNUS SF
Express.
• Enter the license key only when "Use License Key" is selected for the license registration
method.
• If the Advanced Copy license key (paid license) is already registered, proceed to [Register
SED Authentication Key].
• Click the [Skip] button to proceed to the next screen without setting.
(2) Click the [Next >>] button.
(3) A confirmation screen appears. Click the [OK] button.
The Advanced Copy license registration is executed.
(4) Click the [Done] button.
7 Proceed to [Register SED Authentication Key].
(1) Click the [Next >>] button.
Note
• If the SED Authentication Key is already registered, proceed to [Setup Network
Environment].
• Click the [Skip] button to proceed to the next screen without setting.
(2) A confirmation screen appears. Click the [OK] button.
SED Authentication Key registration starts.
(3) Click the [Done] button.
5. General Settings
Initial Setup
80 Configuration Guide (Basic)