8 Proceed to [Setup Network Environment].
(1) Specify the parameters.
The main setting items are as follows.
• Select Network Port
• LAN
• IPv4 Settings
• IPv6 Settings
Caution
Set the network environment for the MNT port. If the network environment setting is not
changed from the factory default setting, some functions will not be available. Refer to
"Caution" in "Initial Setup" (page 75) and "Setup Network Environment" in "ETERNUS Web GUI
User's Guide" for details.
Note
Click the [Skip] button to proceed to the next screen without setting.
(2) Click the [Next >>] button.
(3) A confirmation screen appears. Click the [OK] button.
Setting of the network environment starts.
(4) Click the [Done] button.
The completion screen appears.
5. General Settings
Initial Setup
81 Configuration Guide (Basic)
To Next Page
Loading...
