Index-2 SPARC Enterprise Mx000 Servers XSCF User’s Guide • January 2012
domain mode, 2-173
network, 2-16
system board, 2-170
Configuring an NTP server, 2-95
Configuring IP Packet Filtering Rules for XSCF
Network, 2-31
Configuring XSCF routing, 2-28
Connecting to XSCF through the serial port, 3-7
Connecting to XSCF using ssh, 3-8
Connecting to XSCF using telnet, 3-9
CPU operational modes, 2-177
cpumode, 2-178
cpumode,auto, 2-178
cpumode,compatible, 2-178
Creating a web server certificate by constructing the
self CA, 2-115
D
Daylight saving time, 2-93
DCL information, 2-147
displaying or specifying, 2-160
Deleting a system board from a domain, 2-165
Displaying or specifying DCL information, 2-160
Displaying the audit logs, 2-122
Displaying the XSB status, 2-159
Dividing a PSB into XSBs, 2-171
Domain
assigning or configuring,
2-162
control and maintenance, 5-13
deleting system board, 2-165
moving system board, 2-167
Domain configuration, 2-142
Domain configuration procedure, 2-156
Domain console
and XSCF shell, 3-10
Domain mode configuration, 2-173
Domain Time
setting to XSCF time, 2-100
Dual power feed, 4-22
DVD drive/tape drive unit administration, 2-186
E
Enabling or disabling
XSCF network, 2-24
Enabling or disabling audit, 2-120
Enabling or disabling ssh/telnet, 2-104
Enabling or disabling the automatic boot
function, 2-181
Enabling or disabling the Host watchdog function
and the Break signal suppression,
2-180
Enabling or Disabling the LDAP/SSL Server, 2-73
Enabling or disabling the log archiving, 2-125
Enabling or disabling the mail report function, 2-
142
Enabling/Disabling the SNMP agent, 2-132
Enabling/disabling the SNMPv1 and v2c, 2-135
Error messages
XSCF web,
9-30
Event log, B-7
Extended MIB, C-3
F
Failover, 1-2, 3-16
H
Hardware diagnostic level
changing,
2-179
Host watchdog function
enabling or disabling,
2-180
HTTPS administration, 2-109
I
Importing a web server certificate by using the
external CA or CA in intranet, 2-113
To Next Page
Loading...
Need help?
General