Field Description
Possible values:
• 8 (default value): The radio module is switched off.
• ": Your device is used as an access point in
your network.
• +,": Your device serves as an Access Client in
your network.
• ($: Your device is used as a wireless bridge in your net-
work.
Client mode
Only for Operating Mode = +,"
Possible values:
• 2 "" (default value): In a network in infrastruc-
ture mode, all clients communicate with each other via access
points only. There is no direct communication between the in-
dividual clients.
• :: In ad-hoc mode, an access client can be used as
central interface between a number of terminals. In this way,
devices such as computers and printers can be wirelessly in-
terconnected.
Select the channel to be used.
Operation Band Select the operation band and usage area of the access point.
Possible values:
• & ;:F 218" (default value): our device is oper-
ated at 2.4 GHz (mode 802.11b and mode 802.11g), inside or
outside buildings.
• ;:F 2: Your device is run with 5 GHz (Mode
802.11a/h) inside buildings.
• ;:F 218": Your device is run with 5 GHz (Mode
802.11a/h) inside or outside buildings.
Channel Select the channel to be used.
• For Frequency Band = & ;:F 218"
Possible values are to ' and " (default value).
Funkwerk Enterprise Communications GmbH
8 Wireless LAN
funkwerk W1002/W2002/WIx040/WIx065 121
To Next Page
Loading...
Need help?
General
