Field Description
Transmit Power Select the maximum value for the radiated antenna power. The
actually radiated antenna power may be lower than the maxim-
um value set, depending on the data rate transmitted. The max-
imum value for Transmit Power is country-dependent.
Possible values:
• E (default value): The maximum antenna power is used.
• 6 4: Enter the required maximum value in dBm in
the input field.
• ' (
• D (
• (
• & (
Fields in the Performance Settings menu
Field Description
Wireless Mode Select the wireless technology that the access point is to use.
Possible values:
• $: The device operates only in accordance with 802.11g.
802.11b clients have no access.
• #: Your device operates only in accordance with 802.11b
and forces all clients to adapt to it.
• E (default value)
• E,$: Your device adapts to the client tech-
nology. Only a data rate of 1 and 2 mbps needs to be suppor-
ted by all clients (basic rates). This mode is also needed for
Centrino clients if connection problems occur.
• E 0": Your device adapts to the client
technology. The following applies for mixed-short: The data
rates 5.5 and 11 mbps must be supported by all clients (basic
rates).
Max. Transmission Rate Select the transmission speed.
Possible values:
• "" (default value): The transmission speed is de-
Funkwerk Enterprise Communications GmbH
8 Wireless LAN
funkwerk W1002/W2002/WIx040/WIx065 123
To Next Page
Loading...
Need help?
General
