Funkwerk W1002 User Manual

Fig. 30: Funkwerk Configuration Interface Initial Screen
4.3.1.1 Calling the Funkwerk Configuration Interface
(1) Check whether the device is connected and switched on and that all the necessary
cables are correctly connected (see Connections on page 10).
(2) Check the settings of the PC from which you want to configure your device (see Con-
figuring a PC on page 17).
(3) Open a web browser.
(4) Enter 0""!%11 (or the IP address dynamically assigned by your
DHCP server or the address statically assigned by you with the ComPoint Manager)
in the Web browser's address field.
(5) Enter  in the User field and  in the Password field and click LOGIN.
You are not in the status menu of your device's Funkwerk Configuration Interface (see
Status on page 80).
4.3.1.2 Operating elements
Funkwerk Configuration Interface window
Funkwerk Enterprise Communications GmbH
4 Access and Configuration
funkwerk W1002/W2002/WIx040/WIx065 59

Funkwerk W1002 Specifications

General

Brand	Funkwerk
Model	W1002
Category	Wireless Access Point
Language	English