To Next Page

To Previous Page

Revision C 250cx Series Maternal/Fetal Monitor 14-5

2036946-001

Waveforms: Printing a Waveform Snapshot

Printing a Waveform Snapshot

Select the Print softkey to print a 6-second snapshot of the displayed waveform—

regardless of whether the waveform real-time or frozen. The following figure

provides a sample MECG waveform snapshot on strip chart paper.

The waveform is printed on the lower portion of the top (or left) grid. A vertical tick

mark is printed at the start, 3-second mark, and end (or 6-second mark), for

reference. If the waveform is frozen, 6 seconds of historical data are printed ending

with the time the waveform was frozen on the display. If the waveform is displayed

in real-time, 6 seconds of historical data are printed ending with the time the Print

softkey was activated.

Example MECG Waveform Snapshot

Recorder On

If the recorder is on, the waveform overlaps the MHR/P trace (if enabled), with no

interruption to other trending. The recorder speed remains at the selected rate of 1, 2,

or 3 cm/min.

Other manuals for GE Corometrics 250cx Series

Questions and Answers:

Need help?

Do you have a question about the GE Corometrics 250cx Series and is the answer not in the manual?

General