3-10 250cx Series Maternal/Fetal Monitor Revision C
2036946-001
Controls, Indicators, and Connectors: Additional Parameters
Additional Parameters
The additional parameters area displays NIBP, MHR/P, and MSpO
2
data.
Maternal NIBP
The maternal NIBP section is summarized in the following figure and table.
NIBP Display
NIBP Display
Name Description
A
NIBP Time Stamp The time (in 24-hour format) of the last blood
pressure measurement.
B
NIBP Values The systolic/diastolic and mean arterial pressures
(MAP) are each indicated by up to three digits—
displayed as XXX mmHg or XX.X kPa. All kPa
readings are displayed to 1/10 kPa.
During a determination, the instantaneous cuff
pressure displays in place of the mean arterial
pressure and is denoted by the title Cuff.
C
NIBP Alarm Setting
Indicator
This symbol provides information about the NIBP
audio alarm and the NIBP high/low alarm limit
settings. See Chapter 10, “Alarms” for more
information. Maternal alarms cannot be disabled.
D
NIBP Mode Title Select the mode title to access the NIBP Setup
screen.
E
NIBP Countdown Timer The clock symbol represents activation of the auto
mode. The countdown timer indicates the minutes
and seconds until the next automatic reading.
130/ 85
NIBP
MAP (107)
03:15
11:41
D
E
C
B
A
To Next Page
Loading...
