To Next Page

To Previous Page

3-18 250cx Series Maternal/Fetal Monitor Revision C

2036946-001

Controls, Indicators, and Connectors: Rear Panel Description

CAUTION

NON-DESTRUCTIVE VOLTAGE—The maximum non-

destructive voltage that may be applied to the rear panel

connectors is 0 volts. Do not attempt to connect cables to these

connectors without contacting your Biomedical Engineering

Department or GE Medical Systems Information Technologies

Service Representative. This is to ensure the connectors comply

with leakage-current requirements of one of the following

applicable standards: Underwriters Laboratories UL-2601-1,

Canadian Standards Associations CSA 22.2 No. 125, or

International Electrotechnical Commission EN60601-1.

AC Voltage Selection

Switch

This switch is intended for qualified service

personnel to select a voltage range for the AC

input:

 120: Accepts an AC input in the range of 100–

120 VAC.

 240: Accepts an AC input in the range of 220–

240 VAC

Power Entry Module AC line power cord receptacle. Refer to the rear

panel markings to verify line voltage and line

frequency requirements.

250cx Series Rear Panel (Standard and Optional Features)

Name Description

Other manuals for GE Corometrics 250cx Series

Questions and Answers:

Need help?

Do you have a question about the GE Corometrics 250cx Series and is the answer not in the manual?

General