GE Hydran 201i - Hydran 201 Ti Installation Steps

MA-033 Rev. 14.0, 12-Nov-18
Hydran* 201i Instruction Manual
Page 106
7.3 Installation
This Section explains how to install the Hydran 201Ti, the brass adaptor and the
Hydran 201 sensor; it refers to Figure 7-2 below.
Read all the warnings and recommendations in Section 6.1
(General Warnings) before proceeding with the installation.
Note: It is strongly recommended that the operation of all H201Ti’s and H201Ci
Controllers be verified before installation of the equipment in the field. Verification also
allows the user to become familiar with the Hydran 201i System.
Figure 7-2: Hydran 201Ti Assembly
CAUTION