Appendix H : USB Port Driver Installation
In order to enable the Hydran Host software to work with Hydran 201Ti when
connecting to it via the USB Communication port, the appropriate driver must be
properly installed on the computer where Hydran Host is installed. It is also important to
identify on which COM port of the computer the USB driver is installed.
Proceed as follows:
1. To install the driver, open the manufacturer’s Web site at:
http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx
2. In the Keyword Search tool at the top, type CP2102 driver.
3. Install the driver using the instructions on the Web site.
4. To identify the COM port, right-click My Computer on the computer desktop.
5. In the drop-down menu, click Properties.
To Next Page
Loading...
