GE Hydran 201i - Page 78

MA-033 Rev. 14.0, 12-Nov-18
Hydran* 201i Instruction Manual
Page 78
- The heating plate temperature.
• The analog output.
This command requires password No. 2.
If you go further than the “CalibrateNow?” message in this
submenu, the calibration is destroyed.
There are five branches in this submenu:
• LowRange: Calibration of the H201 sensor signal’s low range.
• HighRange: Calibration of the H201 sensor signal’s high range.
• SensorTemp: Calibration of the H201 sensor temperature.
• HeaterTemp: Calibration of the heating plate temperature.
• SignAnalog: Calibration of the analog output.
CAUTION